AdderallXanax onlineXanax onlineVicodin

Publications

List of selected publications in journals, proceedings and books

  1. Tontowi, A.E., Herliansyah, M.K., Dewo, P., Gentile, P. and Anindyojati, A., 2011, Effect of PVA Coating on Diametral Tensile Strength of Porous Block of Gelatine/Hydroxyapatite Composite, International Seminar of QIR, Denpasar, Bali.
  2. Tontowi, A.E. dan Nugroho, W.S., 2010, Mixing optimization of Epoxy Resin, Hardener and Thinner Liquid as Infiltrant of Gypsum Powder Block uses Response Surface Method, Jurnal Mesin dan Industri.
  3. Tontowi, A.E. dan Patria, D., 2010, Parameter Optimization of Gypsum based material for 3D Printer uses Taguchi Method, Jurnal Mesin dan Industri.
  4. Tontowi, A.E., 2008, Diametral Tensile Strength and Microstructure of Hydroxyapatite-Photopolymer Composite, Jurnal Media Teknik, ISSN 0216-3012, No.4, Th.XXX, pp.550-553.
  5. Darmawan, R. and Tontowi, A.E., 2008, Optimasi Proses Layer Manufaktur dalam Pembuatan Obyek 3D Menggunakan Metode Response Surface, Jurnal Media Teknik, ISSN 0216-3012, No.4, Th.XXX, pp.554-562.
  6. Rachmawati, T. and Tontowi, A.E, 2009, Analysis of Jobshop Makespan using Active, Non-Delay and Heuristic-Generation Methods, Journal of Mesin dan Industri, Vol.6, No.1, Januari 2009, ISSN 1693-704x, pp.1-10.
  7. Tontowi, A.E. and Sugiarto, Z.E., 2009, Dimensional Accuracy of 3D Model of Investment Gypsum, Journal of Mesin dan Industri, Vol.6, No.1, Januari 2009, ISSN 1693-704x, pp.10-24.
  8. Fauzun, I., Hamdi, M., Tontowi, A.E., Ariga, T., 2008, Formulation of the size and position of spiral cooling channel in plastic injection mold based on Fluent simulation results, IEEE International Conference, ISBN: 978-1-4244-2629-4, 8-11 December 2008, Singapore, pp.1728-1733.
  9. Tontowi, A.E., 2008, Diametral Tensile Strength and Microstructure of Hydroxyapatite-Photopolymer Composite, Journal of Media Teknik, No.4, Thaun XXX, Edisi November 2008, ISSN 0216-3012, pp. 550-553.
  10. Darmawan, R. and Tontowi, A.E., 2008, Optimization of Layer Manufacturing Process in Building a 3D Object Using Response Surface Method, Journal of Media Teknik, No.4, Thaun XXX, Edisi November 2008, ISSN 0216-3012, pp. 554-562.
  11. Widodo, I.D., Tontowi, A.E., Subagyo and Sugiyanto, 2008, Product Performance Measurement: A Simple and Integrated Model, The 9th of APIEMS Conference, 3-5 December 2008, Nusa Dua, Bali, Indonesia.
  12. Hamdi, M.,  Zawiyah, S.,  Ariga, T. and Tontowi, A.E., 2008, Green Procurement Adoption in Manufacturing Supply, The 9th of APIEMS Conference, 3-5 December 2008, Nusa Dua, Bali, Indonesia.
  13. Angellia, L.D., Hamdi, M., Zawiyah, S., Dahwal, M., Ariga, T. and Tontowi, A.E., 2008, The Effect of Copper Powder and Porous Copper as Reinforcement on Spreading Characteristic and Strength Development of Sn-Ag-Cu Lead-Free Solder, The 14th Joint Seminar on Regional Deposition Processes in The Atmosphere, Thailand.
  14. Angellia, L.D., Hamdi, M., Zawiyah, S., Ariga, T. and Tontowi, A.E., 2008, Reflow Characteristic of Copper Powder Addition on Sn-Ag-Cu Lead-Free Solder, The 9th of APIEMS Conference, 3-5 December 2008, Nusa Dua, Bali, Indonesia.
  15. Nandiroh, S. and Tontowi, A.E., 2008, Design of Flash Disk Case Using Integrated Kansei Engineering, WEB Collaboration, and Kano-QFD, Journal of Media Teknik, ISSN 0216-7565, Vol.32, No.1, pp.65-76.
  16. Sunarintyas, S., Siswomihardjo, W. and Tontowi, A.E, 2008, Study on Acute Toxicity Test of Locally Produced Hydroxyapatite in Rattus Norvegicus, International Conference on Bio-medical Engineering, 11-12 November 2008, Surabaya, Indonesia.
  17. Tontowi, A.E, Triono, B. and Fauzun, 2008, Recommendation for Cooling Channel Design of Injection Mold by Helix Channel, National Seminar on TechnoSIM 2008, 16 October 2008, Department of Mechanical and Industrial Engineering UGM, Yogyakarta.
  18. Widyanto, S.A., Tontowi, A.E., Jamasri, Rochardjo, H.S.B., 2008, Shape Distortion and Dimension Accuracy of Multimaterial Deposition Indirect Sintering Product, International Conference of Mechanical Engineering, 21-23 May 2008, Johor Bahru, Malaysia.
  19. Widyanto, S.A., Tontowi, A.E., Jamasri, Rochardjo, H.S.B., 2008, Product Dimension Accuracy of Multimaterial Deposition Indirect Sintering Process, Technology and Innovation for Sustainable Development Conference (TISD 2008), Faculty of Engineering, Khon Kaen University, 28-29 January 2008, Thailand.
  20. Widyanto, S.A., Tontowi, A.E., Jamasri, Rochardjo, H.S.B., 2007, Mechanical Strength and Dimension Accuracy of Freeform Fabrication Product of Al-PE/Silica-PE Composite, The 3rd International Conference on Product Design and Development, Department of Mechanical and Industrial Engineering, Faculty of Engineering, Gadjah Mada University, 12-13 December 2007, Yogyakarta, Indonesia.
  21. Widyanto, S.A., Tontowi, A.E., Jamasri, Rochardjo, H.S.B., 2007, Glue Infiltration of the SFF Product of Cast Iron-PE/Silica-PE Composite, Gelagar Journal, Vol.18, No.2, pp.134-140.
  22. Widyanto, S.A., Tontowi, A.E., Jamasri, Rochardjo, H.S.B., 2007, Binding Mechanism and Shrinkage Prediction of Polypropelene, Polyethylene and Silica Particles in Isothermal Sintering Process, Forum Teknik Journal, Vol.31, No.1, pp.61-67.
  23. Widodo, I.D., Tontowi, A.E., Subagyo, Anita, B., Utami, R., and Sugiyanto, 2007, The Analysis of Product Success Factors: A Comparative Study, Proceeding of the 3rd International Conference on Product Design and Development 2007, ISBN 979 389656-6, 12th December 2007, Yogyakarta, Indonesia.
  24. Herliansyah, M.K., Nasution, D. A., Hamdi, M., Ide-Ektessabi, A., Wildan, M.W., and Tontowi, A. E., 2007, Preparation and Characterization of Natural Hydroxyapatite: A Comparative Study of Bovine Bone Hydroxyapatite and Hydroxyapatite from Calcite, Proceeding of The 6th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-6), 5-9 November 2007, Jeju, Korea.
  25. Sedyono, J., Tontowi, A.E. dan Ana, I.D., 2007, Fabrication and XRD Characterization of Hydroxyapatite Synthesized from Kulon Progo Natural Gypsum, Prosiding Seminar Nasional “Perkembangan Riset dan Teknologi dibidang Industri ke-13″, UGM, Yogyakarta.
  26. Siswomihardjo, W., Tontowi, A.E., Ana, I.D., dan Pujianto, E., 2007, Effect of Synthetic Hydroxyapatite on Apoptosis of Human Fibroblasts, The 21st IADR Southeast Asia Division Annual Meeting, 6th-8th September 2007, Bali, Indonesia.
  27. Widyanto, S.A., Tontowi, A.E., Jamasri, Rocharjo, H.S., 2007, Binding Mechanism and Shrinkage Prediction of Polypropylene, Polyethylene and Silica Particles in Isothermal Sintering Process, Forum Teknik, vol.31, No. 1, Januari 2007.
  28. Widyanto, S.A., Tontowi, A.E., Jamasri, Rochardjo, H.S.B., 2006, Determination of Operation Condition and Product Dimension Accuracy Optimization of Filament Deposition Modelling on Layer Manufacturing, Makara Seri Teknologi, Vol.10, No.2, pp.90-95.
  29. Widyanto, S.A., Tontowi, A.E., Jamasri, Rochardjo, H.S.B., 2006, Determination of Operation Condition and Product Dimension Accuracy Optimization of Filament Deposition Modelling on Layer Manufacturing, Makara Seri Teknologi, Vol.10, No.2, pp.90-95.
  30. Widyanto, S.A., Tontowi, A.E., Jamasri, Rochardjo, H.S.B., 2006, Influence of Sintering Temperature and Holding Time on Tensile Strength and Shrinkage of PVC Specimen on Indirect Pressure-less Sintering Process, Jurnal Teknik Mesin ITB, Vol.21, No.1, pp.16-20.
  31. Saragih, R., Lianggoro, I., and Tontowi, A.E., 2006, Quality Design of a Rapid Prototyping Tool Using Response Surface Method, Proceeding of International Seminar on product Design and Development 2006, Yogyakarta, Indonesia.
  32. Widyanto, S., Riyadi, A.S., Tontowi, A.E., Jamasri, Rochardjo, H.S.B., 2006, Influence of Sintering Temperature And Holding Time on Tensile Strenghth And Shrinkage of PVC Specimen In Direct Pressure-Less Sintering Process, Jurnal Teknik Mesin, Vol.21., No.1., April 2006, Program Studi Teknik Mesin, FTI-ITB, Hal.16-20.
  33. Tontowi, A.E. dan Sahidin, 2006, Pengendalian Kualitas Produk Pipa Baja Spiral menggunakan Peta Kendali X dan R, Research report, Department of Mechanical and Industrial Engineering UGM, Yogyakarta, Indonesia.
  34. Tontowi, A.E., 2006, Selective Laser Sintering for Biomedical Application: The New Route of Design to Production System
  35. Fauzun, Hamdi, M., Ariga, T., Tontowi, A.E., 2006, Brazing Temperature and Time Effects on The Microstructure and Mechanical Properties of Copper/BNI-6/Mild Steel Joints, Proceeding of International Seminar on product Design and Development 2006, Yogyakarta, Indonesia.
  36. Herliansyah, M.K., Pujianto, E., Shukor, M.H.b.A., Ektessabi, A.I., Wildan, M.W., Tontowi, A.E., 2006, Preparation And Characterization of natural Hydroxyapatite : Study of X-Ray Diffraction result from Bovine Bone Hydroxyapatite and Natural Gypsum Hidroxyapatite, Proceeding of International Seminar on Product Design and Development 2006, Yogyakarta, Indonesia.
  37. Tontowi, A.E., 2006, Simulasi dan Optimasi untuk Aplikasi Industri Proses, Manufaktur, dan Energi, Makalah Seminar Nasional ” TechnoSIM 2006″ 21 Agustus 2006, Yogyakarta, Indonesia.
  38. Tontowi, A.E., Fauzun, Triyono, B., Febriantoko, B., 2006, Temperature Distribution and Mechanical Strenghth of Plate Joining for Designing of a Layer Mold, Proceeding 8th AUN/SEED-Net Fied Wise Seminar For Manufacturing Engineering “Commercialization of Research Products” Vientine, Laos
  39. Riyadi, S., Widyanto, S.A., Tontowi, A.E., 2006, Optimasi Temperatur dan Waktu Penahanan Pada Proses Indirect Sintering Serbuk PVC Cream Menggunakan Bahan Pasir Silika/Cor Sebagai Support Powders, Prosiding Seminar Nasional Pekembangan Riset dan Teknologi  Bidang Materials dan Proses, pusat Studi Ilmu Teknik UGM, Yogyakarta, Indonesia.
  40. Riyadi, S., Widyanto, S.A., Tontowi, A.E., 2006, Mekanisme Ikatan Antar Butir dan Penyusutan Butir Pada proses sintering Polyethylene, Prosiding Seminar Nasional Pekembangan Riset dan Teknologi  Bidang Materials dan Proses, pusat Studi Ilmu Teknik UGM, Yogyakarta, Indonesia.
  41. Tontowi, A.E., 2006, Nanoteknologi untuk Bahan Teknik, Seminar Mahasiswa Jurusan Teknik Mesin FT UGM, Yogyakarta.
  42. Nasution, D.A., Tontowi, A.E. dan Ana, I.D., 2006, Fabrikasi serta Studi Sifat Mekanik Fisis Biokeramik Hydroxyapatite dari Kalsit Gunung Kidul, Prosiding Seminar Nasional Teknik Industri FT UGM, Yogyakarta.
  43. Tontowi, A.E, Herliansyah, M.K., Fauzun, Triyono, B. and Febrianto, B., 2006, Experiment, Simulation and Mechanical Strength of a Layered Mould with Helical Cooling Channel, The 7th FWS on Product Design and Development- Manufacturing Engineering and Materials Processing, AUN/SEED-Net, 13-15 March 2006, University Malaya, Kuala Lumpur, Malaysia.
  44. Pujianto, E., Siswomihardjo, W., Ana, I.D., Tontowi, A.E., dan Wildan, M.W., 2006, Cytotoxicity of Hydroxyapatite Synthesized from Local Gypsum, Proceeding of BME Days 2006, ITB, 92-95.
  45. Pujianto, E., Tontowi, A.E., Wildan, M.W. and Siswomihardjo, W., 2006, Sintesis Hidroksiapatit dari Gypsum Tasikmalaya sebagai Bahan Baku Tulang Buatan (Kajian Awal Pengembangan Produk Tulang Buatan), National Seminar on /application and Research in Industrial Technology, Department of Mechanical and Industrial Engineering UGM, Yogyakarta, pp.IV 119-126.
  46. Siswomihardjo, W., Tontowi, A.E., Wildan, M.W., Ana, I.D. and Pujianto, E., 2005, Effect of Synthesized Hydroxyapatite on Apoptosis of Human Fibroblast, International Association for Dental Research South East Asian (IADR-SEA) Division, 21st Annual Scientific Meeting, Kuta, Bali, p 45.
  47. Widyanto, S.A., Tontowi, A.E., Jamasri, Rochardjo, H.S.B., 2005, Pengembangan Material Delivery Sub-System dengan Metode Gesekan untuk Aplikasi Proses Multimaterial Layer Manufacturing, Makalah Seminar Nasional STTNas, 11 Juni 2005, Yogyakarta, Indonesia.
  48. Widyanto, S.A., Tontowi, A.E., Jamasri, Rochardjo, H.S.B., 2005, Development of Low Frequency Vibration Method of Direct-Write Deposition Relevant to Layer Manufacturing Application, Makara Seri Teknologi, Vol.9, No.2, pp.53-55.
  49. Widyanto, S.A., Tontowi, A.E., Jamasri, Rochardjo, H.S.B., 2005, Analyzing of Hopper Nozle Vibrator System of Low Frequency Direct-Write Deposition, Forum Teknik, Vol.29, No.3., Hal 201-206.
  50. Widyanto, S.A., Tontowi, A.E., Jamasri, Rochardjo, H.S.B., 2005, Development of Screw Feeder Hopper Nozzle of Direct-Write Deposition Applicable to Layer Manufacturing Process, Forum Teknik, Vol.29, No.3., Hal 207-2010.
  51. Tontowi, A.E., Ana, I.D. dan Widowati, 2005, Material Hydroxyapatite Hasil Transformasi Gypsum Kulon Progo dan Potensinya untuk Pembuatan Gigi Tiruan Manusia, Prosiding Seminar Nasional Jurusan Teknik Mesin FT UGM, Yogyakarta.
  52. Prianto, S.A. dan Tontowi, A.E., 2005, Aplikasi Metode Layer Manufacturing untuk Pembuatan Prototype Piping Joint, Prosiding Seminar Nasional Jurusan Teknik Mesin FT UGM, Yogyakarta.
  53. Tontowi, A.E., Ridlwan, M. dan Rochardjo, H.S.B., 2005, Studi Struktur Mikro Serbuk Fe-C Hasil Plasma Oksiasetilen, Prosiding Seminar Nasional BKSTM, Universitas Udayana, Bali, Indonesia.
  54. Tontowi, A.E, Herliansyah, M.K. and Fauzun, 2005, Integration of Design and Manufacture of Mould, The 6th FWS on Product Design and Development- Manufacturing Engineering and Process, AUN/SEED-Net, 3-4 October 2005, Chulalongkorn University, Bangkok, Thailand
  55. Febriantoko, B. W.  Dan Tontowi, A. E.,  2005, Pengaruh Suhu Air Rendaman pada Kekuatan Mekanik Laminasi Plat Baja, Prosiding Seminar Nasional Perkembangan Riset dan Teknologi bidang Material dan Proses, Pusat Studi Ilmu Teknik UGM, Yogyakarta, Indonesia.
  56. Febriantoko, B. W.  dan Tontowi, A. E.,  2005, Perbandingan Metode Laminasi Adhesive Bonding dan Brazing pada Plat Baja untuk Mold Mesin Injeksi Plastik, Prosiding Simposium Nasional Rekayasa, Aplikasi, dan Perancangan Industri, UMS Surakarta, Indonesia.
  57. Ridlwan, M. dan Tontowi, A.E.,  2005, Proses Pembuatan Serbuk Logam dengan Metoda Atomisasi  Las Oksiasitilen, Jurnal Teknoin UII, Vol.10, No.4, Yogyakarta, Indonesia.
  58. Ridlwan, M., Tontowi, A.E., and Rochardjo, H.S.B., 2005, Studi Struktur Mikro Serbuk Baja Hasil Atomisasi Las Oksiasetilen, Prosiding Seminar Nasional Perkembangan Riset dan Teknologi bidang Material dan Proses, Pusat Studi Ilmu Teknik UGM, Yogyakarta, Indonesia.
  59. Ridlwan. M., tontowi, A.E., Rochardjo, H.S.B., 2005, Pengaruh Sudut Serang Terhadap Efisiensi dan Produktivitas Proses Pembuatan Serbuk Logam Dengan Metoda Atomisasi Las Oksi-Asitilen, Prosiding Seminar Nasional 2005 ” Intelligent control For Manufacturing System” 23 Juli 2005, Yogyakarta
  60. Widyato, S.A., Tontowi, A.E., Jamasri, Rochardjo, H.S.B., 2005, Pengembangan Material Delivery Sub System Dengan Metoda Gesekan Untuk Aplikasi Proses Multi Material Layer manufacturing, Prosiding Seminar Nasional Rekayasa Teknologi Industri dan Informasi, 11 Juni 2005, Yogyakarta
  61. Tontowi, A.E. and Childs, T.H.C., 2005, Penetration of CO2 Laser Radiation into a Powder Bed of Nylon Relevant to Selective Laser Sintering, The 5th FWS on Materials and Manufacturing Technology, AUN/SEED-Net, 27 March-1st April 2005, UM, Kuala Lumpur, Malaysia.
  62. Tontowi, A.E., Herliansyah, M.K. dan Fauzun, 2005, Studi Perpindahan Panas pada  Mold Injeksi Bersaluran Pendingin Konformal Menggunakan Pendekatan Metode Elemen Hingga, Proc. Seminar Nasional Tahunan Teknik Mesin III, 6-7 Desember 2005, Universitas Hasanudin, Makasar.
  63. Tontowi, A.E., Fauzun dan Herliansyah, M.K., 2005, Integrasi Desain dan Fabrikasi Molding Bersaluran Pendingin Konformal (Aplikasi Teknologi Layer Manufacturing), Proc. Seminar Nasional Otomasi II, 2-3 Desember 2005, Universitas Parahyangan, Bandung.
  64. Tontowi, A.E., 2004, Study of a Powder Bed Structure of Stainless Steel 314-HC for Selective Laser Sintering Application, The 4th FWS on Manufacturing Engineering, AUN/SEED-Net, 7-8 October 2004, University of De La Salle, Manila, The Phillipines.
  65. Tontowi, A.E., 2004, Selective Laser Sintering and The Possibility of Processing Bioceramic Materials, Proc. The 3rd FWS on Processing-Properties Relationship in Biomaterials, AUN/SEED-Net, 2-3 August 2004, USM, Penang, Malaysia.
  66. Tontowi, A.E., 2004, Selective Laser Sintering Nylon, Proc. Seminar Nasional Ilmu dan Teknologi Material, 15 Juni 2004, ITS, Surabaya.
  67. Tontowi, A.E., 2004, Propolis: Riset dan Pengembangannya untuk  Industri, Proc. Seminar Nasional Propolis, 29 Mei 2004, FKUGM, Yogyakarta.
  68. Tontowi, A.E., 2004, Density Prediction of A Crystalline Composite Laser Sintered Part Using Combination Methods of FEM and TRM, Proc. The 3rd FWS on Manufacturing and Materials Processing Technology, AUN/SEED-Net, 17-18 March 2004, UM, Kuala Lumpur, Malaysia.
  69. Tontowi, A.E., 2004, Pengembangan Metode Pembelajaran Berbasis Inkubator Industri (Industrial Incubator Based Learning/IIBL), Majalah Lontar, UGM.
  70. Tontowi, A.E., 2003, Laser Sintering Study of a Nylon-Glass Composite Through SEM Imaging, Proc. The 2nd FWS on Materials and Manufacturing Technology, AUN/SEED-Net, 23-24 October 2003, UGM, Yogyakarta.
  71. Tontowi, A.E. dan Sembiring, N., 2003, Modelling of Selective Laser Sintering of Aluminium Powder for Automotive Component Fabrication, Proc. Seminar Nasional AUTOTECH 2003, 18 September 2003, FT-UGM, Yogyakarta.
  72. Tontowi, A.E. dan Agung, Y., 2003, Perancangan dan Pengembangan Produk Handle Bar Hand Tractor Berdasarkan Anthropometry Petani Yogyakarta, Proc. Seminar Nasional Ergonomi, 13 September 2003, FTP-UGM, Yogyakarta.
  73. Tontowi, A.E., 2003, Pengaruh  Parameter Proses Laser Sintering pada Densitas Hasil Sinter, Proc. Seminar Nasional Sistem Produksi VI, 14-15 Agustus 2003, UGM-ITB, Yogyakarta.
  74. Tontowi, A.E., 2003, Selective Laser Sintering Process for Building a Test Model of Wind Tunnel, Proc. International Seminar on Aero Technology 2003, 22nd July 2003, ASA, Yogyakarta.
  75. Tontowi, A.E. dan Sembiring, N., 2003, The First Result on Temperature Prediction of Aluminium Sintering Part: Modelling Approach, Proc. Seminar Nasional Heat dan Mass Transfer, 13 Mei 2003, Pusat Studi Ilmu Teknik UGM, Yogyakarta.
  76. Tontowi, A.E., Untung, J. Dan Yazul., 2003, Perancangan dan Pengembangan Produk Pistol Grip sesuai dengan Anthropometry Prajurit TNI, Proc. Seminar Nasional Ergonomi, 5 April 2003, FTI-UII, Yogyakarta.
  77. Tontowi, A.E., 2003, Density Prediction of A Crystalline Composite Laser Sintered Part Using Combination Methods of FEM and TRM, Proc. The 1st FWS on Manufacturing and Materials Processing Technology, AUN/SEED-Net, 17-18 March 2003, UM, Kuala Lumpur, Malaysia.
  78. Tontowi, A.E. and Childs, T.H.C., 2002, Radiation Absorption into Powder Beds, Relevant to Selective Laser Sintering, Report for The Royal Society UK.
  79. Childs, T.H.C.and Tontowi, A.E., 2001, Selective Laser Sintering of Crystalline and A Glass-filled crystalline Polymer: Experiments and Simulations, Proc. ImechE, Vol.215, Part B, pp.1481-1495.
  80. Tontowi, A.E. and Childs, T.H.C., 2001, Density Prediction of Crystalline Polymer Sintered Parts at Various Powder Bed Temperatures, RP Journal, Vol.7, No.3, pp.180-184.
  81. Childs, T.H.C., Hauser,C., Taylor, C.M. and Tontowi, A.E., 2000, Simulation and Experimental Verification of Crystalline Polymer and Direct Metal Selective Laser Sintering, Proc. SFF, University of Texas at Austin, August 2000.
  82. Childs, T.H.C., Berzin, M., Ryder, G.R. and Tontowi, A.E., 1999, Selective Laser Sintering of an Amorphous Polymer-Simulations and Experiments, Proc.ImechE, Vol.213, Part B, pp.333-349.
  83. Childs, T.H.C., Dalgarno, K., Tontowi, A.E., Hauser, C., Valvato, N., Jamal, N., and C.M.Taylor, 2000, SLS Research-School of Mechanical Engineering Leeds University, Proc. Of CIRP, Paris (to be published).
  84. Tontowi, A.E. and Childs, A.E., 1999, Effect of Porosity on Thermal Conductivity of Duraform Polyamide: A Case Study for SLS Process Modelling, PPI Leeds-Embassy for The Republic of Indonesia to The United Kingdom, Proc. ISTM’99, 6-8 August 1999, Vol.1, ISBN 095362711X, pp. 95-103, Leeds-UK.
  85. Tontowi, A.E. and Childs, A.E., 1999, Numerical Modelling of Selective Laser Sintering Process of Crystalline Polymer-The First Results, ISTECS Europe, Proc. 4th ISSM’99, October 1999, ISSN 0855-8692, pp 128-132, Kassel-Germany.
  86. Tontowi, A.E., 1995, Efektivitas Pendinginan Baja Plat Panas Menggunakan Semburan Udara (Airjet Impingement Cooling of Hot Circular Metal Disk), Media Teknik, No.3 XVII, Edisi Desember 1995, Faculty of Engineering-UGM.
  87. Tontowi, A.E., 1993, Mechanical properties of the Aluminium-GFRP Composite, Media Teknik, Journal of Engineering Faculty-UGM.
  88. Tontowi, A.E., 1990, Improving output power of the Savonius Windmill by applying a plate director, Journal of Engineering Faculty-UGM.
  89. Tontowi, A.E., 1989, Effect of Spoiler to the Negative Lift of Van Vehicle-Wind Tunnel Experiment, Journal of Engineering Faculty-UGM.
  90. Tontowi, A.E., 1988, Ground Effect of Van Vehicle-Wind Tunnel Experiment, Journal of Engineering Faculty-UGM.

Published Book:

  1. Tontowi, A.E., Shriahimsa, H. and Amelia, 2009, Etno-Desain: Etnografi untuk Desain, Penerbit Erlangga (planning)
  2. Tontowi, A.E., 2008, Laser Sintering: Teori, Simulasi Numerik dan Eksperimen, Gadjah Mada University Press, Yogyakarta.
  3. Tontowi, A.E., 2013, Produk Inovatif: Desain, Prototyping dan HKI, Deepublish, Yogyakarta.

Dr. Alva E.Tontowi -Ph.D Thesis: “Selective Laser Sintering of Crystalline Polymer: Modelling and Experiment” (University of Leeds-UK, June 2000)

  1. No comments yet.
  1. No trackbacks yet.